Fire Fighting Solution
Adjustable J Hanger
APPLICATION
Can be suspended by a hanger rod or attached to a wall. “T” slot in the hanger permits the side bolt to be Installed after installation and setting of the pipe.
CONSTRUCTION
Strap and bolt with nut-assembled
MATERIALS
Carbon Steel and any other materials can also be provided upon request
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized
Clevis Hanger with EPDM Lining
APPLICATION
Designed for suspension of Insulated or non-Insulated stationary pipes
CONSTRUCTION
Consists of a yoke and a support strap made from shaped carbon steel strip and a joining bolt. 15° swing in either direction allows the pipe to easily feed through. The pipe will not pinch when installing. Engineered design aligns bolt holes for quicker overhead installation.
MATERIALS
Galvanized Carbon Steel and any other materials can be provided upon request
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized
APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015
FINISH
Plain, Electro-Galvanized, Hot Dip Galvanized.
TEMPERATURE
from-20 °C to +110 °C
Clevis Hanger
APPLICATION
Designed for suspension of insulated or non-insulated stationary pipes
CONSTRUCTION
Consists of a yoke and a support strap made from shaped carbon steel strip and a joining bolt. 15° swing in either direction allows the pipe to easily feed through. The pipe will not pinch when installing. Engineered design aligns bolt holes for quicker overhead installation.
MATERIALS
Galvanized Carbon Steel and any other materials can be provided upon request
APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015
FINISH
Plain, Electro-Galvanized, Hot Dip Galvanized
MAXIMUM TEMPERATURE
343°C
Closed Spring Mount
APPLICATION
Application examples include – Chillers. AHU’S pumps, centrifugal / Axial Fans, Condensing Units, Rooftop Packaged units, Reciprocating compressors, DG sets, Punch presses, Drop Hammers, Floor Pipe supports
Normally at first few pipe supports points leading from isolated equipment
Normally at first few pipe supports points leading from isolated equipment
DESIGN FEATURES
Color coded spring to facilitate Identification.
Deflection up to 25mm.
Load up to 100 kgs.
7 Load Ranges
Deflection up to 25mm.
Load up to 100 kgs.
7 Load Ranges
Drop in Anchor
APPLICATION
Mechanical Electrical Plumbing applications, clamping, pipe supports, cable conduits, railings.
BASE MATERIAL
Non-Cracked Concrete.
Cracked concrete with multiple attachments.
Cracked concrete with multiple attachments.
FEATURES
Displacement controlled expansion anchor with internally threaded.
Galvanized steel suitable for indoor/dry conditions.
Secure hold and fast installation. Immediately load-bearing.
Galvanized steel suitable for indoor/dry conditions.
Secure hold and fast installation. Immediately load-bearing.
Flat Top Hanger
APPLICATION
Designed for suspension of Insulated or non-insulated stationary pipes
CONSTRUCTION
Consists of a yoke and a support strap made from shaped carbon steel strip and a joining bolt. 15° swing in either direction allows the pipe to easily feed through. The pipe will not pinch when installing. Engineered design aligns bolt holes for quicker overhead installation.
MATERIALS
Galvanized Carbon Steel and any other materials can be provided upon request.
APPROVALS
Manufactured to follow specifications of
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized.
Inertia Base
APPLICATION
Reciprocating Compressors
Diesel Generating Sets
Engine/Dynamometer Test Rigs
Refrigeration Plants
Pumps (Particularly Belt Driven Types)
Diesel Generating Sets
Engine/Dynamometer Test Rigs
Refrigeration Plants
Pumps (Particularly Belt Driven Types)
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating
Light Welded Steel Bracket
APPLICATION
Designed to suspend a hanger rod from a wall or structure to sustain low loads under 336.5 kg
MATERIALS
Carbon Steel
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized or epоху coating
Open Spring Mount
APPLICATION
Open Spring Isolators are recommended for use in Isolating sources of noise and vibration located near critically quiet areas. They are highly effective for control of both high and low frequency vibration produced by reciprocating refrigeration compressors, pumps, packaged air-handling and air conditioning equipment, centrifugal and axial fans, inertia bases, Internal bases, Internal combustion engines etc.
FEATURES
Color coded spring to facilitate Identification.
Isolates low frequency vibration
Isolates low frequency vibration
Riser Clamp – Four Bolts
APPLICATION
recommended for the support and/or restraint of vertical steel pipes. designed to attach to the pipe and to rest on a structural member or floor, it is not designed to have hanger rods attached to it to support the pipe.
CONSTRUCTION
RISER CLAMPS consist of two carbon steel flat bars bent to shape and held together by two bolts. Designed to act as a rigid support or guide for vertical pipes. The clamp should be bolted to the pipe just below support lugs or other attachments that can carry a shear load.
MATERIALS
Carbon Steel and any other materials can also be provided upon request
APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating
MAXIMUM TEMPERATURE
343°C
Riser Clamp
APPLICATION
RISER CLAMPS are recommended for the support and/or restraint of vertical steel pipes. A RISER CLAMP is designed to attach to the pipe and to rest on a structural member or floor, it is not designed to have hanger rods attached to it to support the pipe.
CONSTRUCTION
RISER CLAMPS consist of two carbon steel flat bars bent to shape and held together by two bolts. Designed to act as a rigid support or guide for vertical pipes. The clamp should be bolted to the pipe just below support lugs or other attachments that can carry a shear load.
MATERIALS
Carbon Steel and any other materials can also be provided upon request
APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015
FINISH AVAILABLE
Plain,Electro-Galvanized, Hot Dip Galvanized
TEMPERATURE
Maximum Temperature is 343°C
Sprinkler Hanger ( Swivl )
APPLICATION
Designed to suspend non-insulated stationary pipes and Sprinkler system installation
CONSTRUCTION
Consists of a piece of carbon steel shaped to support the pipe. Gives Double thickness at the support. Most suitable for fire extinguishing pipes Installation
MATERIALS
Galvanized Carbon Steel and any other materials can also be provided upon request
APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized
MAXIMUM TEMPERATURE
343°C
Support Channel
APPLICATION
Metal Framing/Electrical Applications
Pipe & Conduit Supports
Tunnel Pipe Stanchions
Beam Attachments
Pipe Riser
Pipe & Conduit Supports
Tunnel Pipe Stanchions
Beam Attachments
Pipe Riser
MATERIALS
Carbon Steel. Also, other materials can also be provided on request.
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized or epоху coating
SIZES
41 X 21 mm
41 X 41 mm
Threaded Rod
MATERIALS
Mild Steel, Carbon Steel, Alloy Steel & Stainless Steel
SIZE RANGE
M6 to M64 in metric series
Default Length 200cm
Other Lengths can be manufactured as per order
Default Length 200cm
Other Lengths can be manufactured as per order
ORDERING INFORMATION
Dimensions – Size Diameter & Length
Finish – Black, Zinc Plated, Hot Dip Galvanized
Finish – Black, Zinc Plated, Hot Dip Galvanized
U Bolt with Lining
APPLICATION
Used to secure piping to structural members. When the piping is below the structural member, the U-Bolt provides vertical support and restricts lateral movement while allowing for axial movement. When the piping system is above the structural member, the U-Bolt restricts lateral movement and upward movement while allowing axial movement of the piping
CONSTRUCTION
Consists of a piece of carbon steel shaped to hold the pipe down to walls or ceilings provided with four standard hex nuts and has a longer straight threaded length
MATERIALS
Carbon Steel and any other materials can be provided upon request
APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized
MAXIMUM TEMPERATURE
20°C to 110°C
U Bolt
APPLICATION
Used to secure piping to structural members. When the piping is below the structural member, the U-Bolt provides vertical support and restricts lateral movement while allowing for axlal movement. When the piping system is above the structural member, the U-Bolt restricts lateral movement and upward movement while allowing axial movement of the piping
CONSTRUCTION
Consists of a piece of carbon steel shaped to hold the pipe down to walls or ceilings provided with four standard hex nuts and has a longer straight threaded length
MATERIALS
Carbon Steel and any other materials can also be provided upon request
APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized
MAXIMUM TEMPERATURE
Maximum Temperature 399°C
VEE Bottom Clevis Hanger
APPLICATION
Designed for suspension of Insulated or non-insulated stationary pipes
CONSTRUCTION
Consists of a yoke and a support strap made from shaped carbon steel strip and a Joining bolt. 15° swing in either direction allows the pipe to easily feed through. The pipe will not pinch when installing. Engineered design aligns bolt holes for quicker overhead installation.
MATERIALS
Galvanized Carbon Steel
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized
Wedge Anchor
APPLICATIONS
Metal structures, metal profiles, brackets, foot plates, supports, cable conduits, piping, railings, wooden structures, beams.
FEATURES
Torque controlled expansion anchor with washer and hexagonal nut.
Zinc electroplated Steel (7-10 µm)
suitable for (Lift guide rails,industrial doors and gates, Storage systems)
Secure hold and easy installation
Impact protection for the thread.
Immediately load-bearing.
Zinc electroplated Steel (7-10 µm)
suitable for (Lift guide rails,industrial doors and gates, Storage systems)
Secure hold and easy installation
Impact protection for the thread.
Immediately load-bearing.
BASE MATERIAL
Non-Cracked Concrete.
Cracked concrete with multiple attachments
Cracked concrete with multiple attachments