Designed to be used in the suspension of a hanger rod from the center of an I-beam. The clamp design allows the load to be distributed equally on either side of the beam.

Carbon Steel and any other materials can also be provided upon request

Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating

Designed for suspension of insulated or non-insulated stationary pipes

Consists of a yoke and a support strap made from shaped carbon steel strip and a joining bolt. 15° swing in either direction allows the pipe to easily feed through. The pipe will not pinch when installing. Engineered design aligns bolt holes for quicker overhead installation.

Galvanized Carbon Steel and any other materials can be provided upon request

APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized.

TEMPERATURE
from-20 °C to +110 °C

Designed for suspension of insulated or non-insulated stationary pipes

Consists of a yoke and a support strap made from shaped carbon steel strip and a joining bolt. 15° swing in either direction allows the pipe to easily feed through. The pipe will not pinch when installing. Engineered design aligns bolt holes for quicker overhead installation.

Galvanized Carbon Steel and any other materials can be provided upon request.

APPROVALS
Manufactured to follow specifications of
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized.

Designed to be used in the clamping of pipe lines at a fixed distance away from the floor or wall

Rubber mould product with steel caps on both sides

Carbon Steel and any other materials can also be provided upon request

Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating

PIPE HANGER WITH LINING is recommended for non-insulated stationary pipelines in a horizontal position. It can be use for supporting pipes along roof

PIPE clamp with lining consists of piece carbon steel shaped to wrap around the pipe, made from shaped carbon steel plate. The selection of the proper PIPE HANGER WITH EPDM LINING depends upon the temperature of the piping system and load to be carried. Permits installation before and after pipe is in place. Reduces noise upto 18 dB

alloy steel and any other materials can also be provided upon request

APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating

TEMPERATURE
-20°C to110°C

Used for mounting of pipes to the walls (vertical / horizontal) ceilings and floors

PIPE clamp consists of piece carbon steel shaped to wrap around the pipe, made from shaped carbon steel plate

alloy steel and any other materials can also be provided upon request

APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating

RISER CLAMPS are recommended for the support and/or restraint of vertical steel pipes. A RISER CLAMP is designed to attach to the pipe and to rest on a structural member or floor; It is not designed to have hanger rods attached to it to support the pipe.

RISER CLAMPS consist of two carbon steel flat bars bent to shape and held together by two bolts. Designed to act as a rigid support or guide for vertical pipes. The clamp should be bolted to the pipe just below support lugs or other attachments that can carry a shear load.

Carbon Steel and any other materials can also be provided upon request

APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized

TEMPERATURE
Maximum Temperature Is 343°C

Hangers are used to isolate suspended sources of both noise and vibration. Suspended mechanical equipment such as air handling units, FCU’s cabinet fans, piping and ductwork in close proximity to rotating mechanical equipment are typical applications of model hangers

Spring Vibration Isolation hangers are designed to provide high efficiency Isolation from structure-borne vibration and noise. Spring Hangers consist of freestanding; laterally stable steel springs in series with a moulded elastomeric element assembled into a stamped and welded hanger bracket. The hanger brackets and the springs are powder coated. Springs are colour-coded according to load ratings and are designed for 50% overload. Spring Hangers are designed to meet BS1726, class B.

Designed for high static loading requirement in plant construction. Pipe clamps manufactured according to DIN 3567

PIPE CLAMPS consists of two carbon steel flat bars bent to shape and held together by two bolts.

Carbon Steel and any other materials can also be provided upon request

APPROVALS
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating

Recommended for suspension of cold pipe lines or hot lines where no insulation is required.

PIPE CLAMPS consist of two carbon steel flat bars bent to shape and held together by two bolts.

Carbon Steel and any other materials can also be provided upon request

TEMPERATURE
110°C To-20°C

Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating

Used to secure piping to structural members. When the piping is below the structural member, the U-Bolt provides vertical support and restricts lateral movement while allowing for axial movement. When the piping system is above the structural member, the U-Bolt restricts lateral movement and upward movement while allowing axial movement of the piping

Consists of a piece of carbon steel shaped to hold the pipe down to walls or ceilings provided with four standard hex nuts and has a longer straight threaded length

Carbon Steel and any other materials can be provided upon request

APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized

MAXIMUM TEMPERATURE
20°C to 110°C

Used to secure piping to structural members. When the piping is below the structural member, the U-Bolt provides vertical support and restricts lateral movement while allowing for axial movement. When the piping system is above the structural member, the U-Bolt restricts lateral movement and upward movement while allowing axial movement of the piping

Consists of a piece of carbon steel shaped to hold the pipe down to walls or ceilings provided with four standard hex nuts and has a longer straight threaded length

Carbon Steel and any other materials can also be provided upon request

APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized

MAXIMUM TEMPERATURE
Maximum Temperature 399°C

Recommended for supporting a piping system with fittings vertically or horizontally to walls or ceilings. It can be used as a restrainer when Installed on top of structural wood beams for beam, for limiting pipe movements due to thrust loads during sprinkler system start-up

Consists of a piece of carbon steel shaped to hold the pipe down to walls or ceilings- Lining reduces noise up to 18 dB

Carbon Steel and any other materials can be provided upon request

APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating

MAXIMUM TEMPERATURE
343°C