Recommended for suspended pipes in applications where horizontal movement, due to expansion and contraction, will occur and vertical adjustment is necessary.

Steel. Also, other materials can also be provided on request

APPROVALS
Manufacturers Standardization Society
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating

Used to secure piping to structural members. When the piping is below the structural member, the U-Bolt provides vertical support and restricts lateral movement while allowing for axial movement. When the piping system is above the structural member, the U-Bolt restricts lateral movement and upward movement while allowing axial movement of the piping

Consists of a piece of carbon steel shaped to hold the pipe down to walls or ceilings provided with four standard hex nuts and has a longer straight threaded length

Carbon Steel and any other materials can be provided upon request

APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized

MAXIMUM TEMPERATURE
20°C to 110°C

Alternate High/Low Ribbed Construction
Easy to Cut
Pads can be cut slightly larger than the size of leg of machines using shear or knife
Easy Field Installation
Multiple layers of Ribbed Mounting Pad can be used to Increase deflection
Provides the highest level of sound attenuation and vibration Isolation

Rubber

Measurements are subject to a 5% tolerance
To achieve good muffling, do not over-mount loads

Designed to support pipe horizontally straight cut pipe thread on.

Iron saddle with steel coupling and base plate with adjustable threaded screw

Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating

Recommended for supporting a piping system with fittings vertically or horizontally to walls or ceilings. It can be used as a restrainer when Installed on top of structural wood beans for beam, for limiting pipe movements due to thrust loads during sprinkler system start-up

Consists of a piece of carbon steel shaped to hold the pipe down to walls or ceilings – Lining reduces noise up to 18 dB

Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating

TEMPERATURE
20°C to 110°C

Used to secure piping to structural members. When the piping is below the structural member, the U-Bolt provides vertical support and restricts lateral movement while allowing for axial movement. When the piping system is above the structural member, the U-Bolt restricts lateral movement and upward movement while allowing axial movement of the piping

Consists of a piece of carbon steel shaped to hold the pipe down to walls or ceilings provided with four standard hex nuts and has a longer straight threaded length

Carbon Steel and any other materials can also be provided upon request

APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized

MAXIMUM TEMPERATURE
Maximum Temperature 399°C

Axial Fans and Fan Coil Units.
Ductwork and Attenuators.
Exhaust Systems.
Acoustic Ceilings.
Any other suspended plant

Rubber & Steel

Rubber & Steel

RISER CLAMPS are recommended for the support and/or restraint of vertical steel pipes. A RISER CLAMP is designed to attach to the pipe and to rest on a structural member or floor, it is not designed to have hanger rods attached to it to support the pipe.

RISER CLAMPS consist of two carbon steel flat bars bent to shape and held together by two bolts. Designed to act as a rigid support or guide for vertical pipes. The clamp should be bolted to the pipe just below support lugs or other attachments that can carry a shear load.

Carbon Steel and any other materials can also be provided upon request

APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized

TEMPERATURE
Maximum Temperature is 343°C

Designed to suspend non-Insulated stationary pipes and Sprinkler system Installation

Consists of a piece of carbon steel shaped to support pipe. Gives Double thickness at the support. Most suitable for fire extinguishing pipes Installation

Galvanized Carbon Steel and any other materials can also be provided upon request

APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized

MAXIMUM TEMPERATURE
343°C

Hangers are used to isolate suspended sources of both noise and vibration. Suspended mechanical equipment such as air handling units, FCU’s cabinet fans, piping and ductwork in close proximity to rotating mechanical equipment are typical applications of model hangers

Spring Vibration Isolation hangers are designed to provide high efficiency isolation from structure-bone vibration and noise. Spring Hangers consist of freestanding, laterally stable steel springs in series with a moulded elastomeric element assembled into a stamped and welded hanger bracket. The hanger brackets and the springs are powder coated. Springs are colour-coded according to load ratings and are designed for 50% overload. Spring Hangers are designed to meet BS1726, class B.

Reciprocating Compressors
Diesel Generating Sets
Engine/Dynamometer Test Rigs
Refrigeration Plants
Pumps (Particularly Belt Driven Types)

Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating

Recommended for support of pipe where longitudinal movement due to expansion and contraction

Steel. Also, other materials can also be provided on request

APPROVALS
Manufacturers Standardization Society
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating

Recommended for support of pipe where longitudinal movement due to expansion and contraction may occur, but where no vertical adjustment is required.

Steel. Also, other materials can also be provided on request.
APPROVALS
Manufacturers Standardization Society
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain, Hot Dip Galvanized, Electro-Galvanized

Mild Steel, Carbon Steel, Alloy Steel & Stainless Steel
SIZE RANGE
M6 to M64 In metric series
Default Length 200cm
Other Lengths can be manufactured as per order

Dimensions-Size Diameter & Length
Finish-Black, Zinc Plated, Hot Dip Galvanized

Application examples include – Chillers. AHU’S pumps, centrifugal/Axial Fans, Condensing Units, Rooftop Packaged units, Reciprocating compressors, DG sets, Punch presses, Drop Hammers, Floor Pipe supports
Normally at first few pipe supports points leading from Isolated equipment

Color coded spring to facilitate Identification.
Deflection up to 25mm.
Load up to 100 kgs.
7 Load Ranges

Designed for suspension of insulated or non-insulated stationary pipes

Consists of a yoke and a support strap made from shaped carbon steel strip and a Joining bolt. 15° swing in either direction allows the pipe to easily feed through. The pipe will not pinch when installing. Engineered design aligns bolt holes for quicker overhead installation.

Galvanized Carbon Steel and any other materials can be provided upon request

APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized
MAXIMUM TEMPERATURE
343°C

Metal structures, metal profiles, brackets, foot plates, supports, cable conduits, piping, railings, wooden structures, beams.

Torque controlled expansion anchor with washer and hexagonal nut.
Zinc electroplated Steel (7-10 µm)
suitable for (Lift guide rails, Industrial doors and gates, Storage systems)
Secure hold and easy installation
Impact protection for the thread.
Immediately load-bearing

Non-Cracked Concrete.
Cracked concrete with multiple attachments

Recommended for suspension of cold pipe lines or hot lines where no insulation is required.

PIPE CLAMPS consist of two carbon steel flat bars bent to shape and held together by two bolts.

Steel. Also, other materials can also be provided on request.

APPROVALS
Manufacturers Standardization Society
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating

MAXIMUM TEMPERATURE
343°C