HVAC Solution
Adjustable Strut Bracket
APPLICATION
SUSPENSION OF Fan Coil Units Pipes Ducts Brackets Light Weight Equipment FLOOR MOUNTING OF (using rubber element only) Refrigerators Domestic Appliances Industrial Lightweight Equipment
MATERIALS
Carbon Steel
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized or epоху coating
Anti Vibration Mounts
CHARACTERISTICS
Wide Application
Our Rubber Motor Mounts are mainly used for air compressors, diesel engines, gasoline engines, water pumps. Electron components, medical equipment, home appliance, mechanical equipment, office facilities, aviation, construction, automobile and may more applications
Anti-vibration & Noiseless
As a damping element for welding machines and other equipment, these boltable rubber body mounts provide excellent performance for vibration, shock and noise control, greatly helping protect the body’s normal work and get good surroundings.
Dynamic & Stable
A simple geometrical designed radiator mount bushing bolt supports dynamic performance and high stability under lateral (sideways) forces. In the radio equipment, Instruments protect machine vibration interference, having a good buffer.
Our Rubber Motor Mounts are mainly used for air compressors, diesel engines, gasoline engines, water pumps. Electron components, medical equipment, home appliance, mechanical equipment, office facilities, aviation, construction, automobile and may more applications
Anti-vibration & Noiseless
As a damping element for welding machines and other equipment, these boltable rubber body mounts provide excellent performance for vibration, shock and noise control, greatly helping protect the body’s normal work and get good surroundings.
Dynamic & Stable
A simple geometrical designed radiator mount bushing bolt supports dynamic performance and high stability under lateral (sideways) forces. In the radio equipment, Instruments protect machine vibration interference, having a good buffer.
OTHER
CYLINDERICAL MOUNTS-MALE MALE TYPE VV SERIES
The dimension range is available in various sizes between 8-150mm,suitable for use on any application in need of vibration isolation where a Male / Male thread is required. They are available in natural rubber as standard but other compounds are available on request.
Stainless steel metal parts are also available on request for substantial volume orders.
The dimension range is available in various sizes between 8-150mm,suitable for use on any application in need of vibration isolation where a Male / Male thread is required. They are available in natural rubber as standard but other compounds are available on request.
Stainless steel metal parts are also available on request for substantial volume orders.
Anti Vibration Pads
SPECIFICATIONS
Alternate High/Low Ribbed Construction
Easy to Cut
Pads can be cut slightly larger than the size of leg of machines using shear or knife
Easy Field Installation
Multiple layers of Ribbed Mounting Pad can be used to Increase deflection
Provides the highest level of sound attenuation and vibration isolation
Easy to Cut
Pads can be cut slightly larger than the size of leg of machines using shear or knife
Easy Field Installation
Multiple layers of Ribbed Mounting Pad can be used to Increase deflection
Provides the highest level of sound attenuation and vibration isolation
MATERIALS
Rubber
NOTE
Measurements are subject to a 5% tolerance
To achieve good muffling, do not over-mount loads
To achieve good muffling, do not over-mount loads
Beam Clamp
SIZE RANGE
3/8″ and 1/2″ or M10 and M12
MATERIALS
Ductile Iron, Hardened Steel cup point set screw and lock nut.
FINISH
Black or galvanized.
SERVICE
Structural attachment to top or bottom of metal beams, purlins, channels or angel Iron
APPROVALS
Complies with Federal Specification A-A-1192A (Type 19 & 23) WW-H-171-E (Type 23)
& MSS-SP-69 (Type 19 & 23)
C – Clamp
APPLICATION
Designed to be used in the suspension of a hanger rod from the center of an I-beam. The clamp design allows the load to be distributed equally on either side of the beam.
MATERIAL
Carbon Steel and any other materials can also be provided upon request
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating
Cable tray Bolt DIN-603
MATERIALS
Mild Steel, Carbon Steel, Alloy Steel & Stainless Steel
SIZE RANGE
M5 to M12 in metric series
ORDERING INFORMATION
Dimensions – Size Diameter and Length
Finish – Zinc Plated
Finish – Zinc Plated
Clevis Concrete Plate
APPLICATION
SPRING HANDesigned for the attachment to concrete ceilings where flexibility is desired.
Normally used in conjunction with weldless eye nut or welded eye rod.GERS are used to Isolate suspended sources of both noise and vibration. Suspended mechanical equipment such as air handling units, FCU’s cabinet fans, piping and ductwork in close proximity to rotating mechanical equipment are typical applications of model hangers.
Normally used in conjunction with weldless eye nut or welded eye rod.GERS are used to Isolate suspended sources of both noise and vibration. Suspended mechanical equipment such as air handling units, FCU’s cabinet fans, piping and ductwork in close proximity to rotating mechanical equipment are typical applications of model hangers.
MATERIAL
Carbon Steel
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating
Closed Spring Mount
APPLICATION
Application examples include – Chillers. AHU’S pumps, centrifugal/Axial Fans, Condensing Units, Rooftop Packaged units, Reciprocating compressors, DG sets, Punch presses, Drop Hammers, Floor Pipe supports Normally at first few pipe supports points leading from isolated equipment
DESIGN FEATURES
Color coded spring to facilitate Identification.
Deflection up to 25mm.
Load up to 100 kgs.
7 Load Ranges
Deflection up to 25mm.
Load up to 100 kgs.
7 Load Ranges
Concrete Rod Attachment Plate
APPLICATION
Usually used in conjunction with a threaded rod, nut, and anchors of sufficient strength to support the necessary weight.
CONSTRUCTION
Pipe hanger rods are attached to concrete ceilings with Concrete Rod Attachment Plates
MATERIAL
Carbon Steel
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating
Coupling Nut
MATERIALS
Mild Steel, Carbon Steel, Alloy Steel
SIZE RANGE
M6 to M20 In metric series
ORDERING INFORMATION
Dimensions-Size Diameter and Length
Finish-Zinc Plated
Finish-Zinc Plated
Drop in Anchor 1
APPLICATION
Mechanical Electrical Plumbing applications, clamping, pipe supports, cable conduits, railings.
BASE MATERIAL
Non-Cracked Concrete.
Cracked concrete with multiple attachments.
Cracked concrete with multiple attachments.
FEATURES
Displacement controlled expansion anchor with internally threaded.
Galvanized steel suitable for indoor/dry conditions.
Secure hold and fast installation. Immediately load-bearing
Galvanized steel suitable for indoor/dry conditions.
Secure hold and fast installation. Immediately load-bearing
Hex Bolt DIN-933
MATERIALS
Mild Steel, Carbon Steel, Alloy Steel & Stainless Steel
SIZE RANGE
M6 to M52 in metric series
Bigger sizes can be manufactured as per order
Bigger sizes can be manufactured as per order
ORDERING INFORMATION
Dimensions-Size Diameter and Length
Finish – Black, Zinc Plated, Hot Dip Galvanized
Finish – Black, Zinc Plated, Hot Dip Galvanized
Hex Nut DIN-934
MATERIALS
Mild Steel, Carbon Steel, Alloy Steel & Stainless Steel
SIZE RANGE
M4 to M36 In metric series
Bigger sizes can be manufactured as per order
Bigger sizes can be manufactured as per order
ORDERING INFORMATION
Dimensions-Size Diameter
Finish-Black, Zinc Plated, Hot Dip Galvanized
Finish-Black, Zinc Plated, Hot Dip Galvanized
Inertia Base
APPLICATION
Reciprocating Compressors
Diesel Generating Sets
Engine/Dynamometer Test Rigs
Refrigeration Plants
Pumps (Particularly Belt Driven Types)
Diesel Generating Sets
Engine/Dynamometer Test Rigs
Refrigeration Plants
Pumps (Particularly Belt Driven Types)
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized or epoху coating
Light Duty Welded Bracket
APPLICATION
These welded brackets have the function of holding the pipe on top or hanging from the mounting surface through the support bracket.
MATERIAL
Carbon Steel
FINISH
Mild Steel/Stainless Steel
Light Welded Steel Bracket Clip
MATERIALS
Light Welded Steel Bracket Clip Is a structural component used for various applications, Including supporting light loads, suspending hanger rods, or attaching fixtures. It is designed for the suspension of hanger rods for support of light loads. These clips are often part of a larger system of pipe hangers and supports and are chosen for their durability and ease of Installation.
MATERIAL
Carbon Steel
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating
Light Welded Steel Bracket
APPLICATION
Designed to suspend a hanger rod from a wall or structure to sustain low loads under 336.5 kg.
MATERIALS
Carbon Steel
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating
Offset Hanger
APPLICATION
Recommended for suspension of cold pipe lines or hot lines where no insulation is required.
CONSTRUCTION
PIPE CLAMPS consist of two carbon steel flat bars bent to shape and held together by two bolts.
FINISH
Plain, Hot Dip Galvanized, Electro-Galvanized.
Open Spring Mount
APPLICATION
Open Spring Isolators are recommended for use in Isolating sources of noise and vibration located near critically quiet areas. They are highly effective for control of both high and low frequency vibration produced by reciprocating refrigeration compressors, pumps, packaged air-handling and air conditioning equipment, centrifugal and axial fans, inertia bases, internal bases, internal combustion engines etc.
FEATURES
Color coded spring to facilitate identification.
Isolates low frequency vibration
Isolates low frequency vibration
PIPE INSULATION SADDLE
APPLICATION
Designed for use on insulated high temperature systems where heat losses are to be kept to a minimum and to protect insulation against damage
MATERIAL
Steel. Also, other materials can also be provided on request.
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating
APPROVALS
Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58(Type 39)
Federal Specification WW-H-171E & A-A-1192A (Type 40A & 408)
Rubber Inserts – RSI
FEATURES & BENEFITS
used at the supporting points of insulated pipes to prevent crushing of
Insulation
inherently superior to wood
very high load bearing capacity
dimensionally accurate as each piece is moulded tongue and groove design
available with steel reinforcements for higher sizes
Insulation
inherently superior to wood
very high load bearing capacity
dimensionally accurate as each piece is moulded tongue and groove design
available with steel reinforcements for higher sizes
MATERIAL
EPDM rubber
MAXIMUM TEMPERATURE
110°C
MINIMUM TEMPERATURE
-20°C
THERMAL CONDUCTIVITY
0.16W/m°C
RSI thickness T
Rubber Support Inserts (RSI) are available in the following standard insulation thicknesses:
(T). 13mm, 19mm, 25mm, 32mm,
38mm, 50mm, 65mm & 75mm.
(T). 13mm, 19mm, 25mm, 32mm,
38mm, 50mm, 65mm & 75mm.
Side Beam Angle Clip 1
APPLICATION
Designed for attaching a hanger rod to the side of beams or walls.
Construction
Made with Bending of Steel Strips.
Material
Steel (Stainless steel available)
Single Lug ConCrete Plate
APPLICATION
The structural attachment to the concrete ceiling lug is utilized in conjunction with forged steel clevis and anchors of sufficient strength to support the necessary load.
MATERIAL
Carbon Steel
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating
Spring Hanger
APPLICATION
Hangers are used to isolate suspended sources of both noise and vibration. Suspended mechanical equipment such as air handling units, FCU’s cabinet fans, piping and ductwork in close proximity to rotating mechanical equipment are typical applications of model hangers
CONSTRUCTION
Spring Vibration isolation hangers are designed to provide high efficiency Isolation from structure-borne vibration and noise. Spring Hangers consist of freestanding, laterally stable steel springs in series with a moulded elastomeric element assembled into a stamped and welded hanger bracket. The hanger brackets and the springs are powder coated. Springs are colour-coded according to load ratings and are designed for 50% overload. Spring Hangers are designed to meet BS1726, class B.
Support Channel
APPLICATION
Metal Framing/Electrical Applications
Pipe & Conduit Supports
Tunnel Pipe Stanchions
Beam Attachments
Pipe Risers
Pipe & Conduit Supports
Tunnel Pipe Stanchions
Beam Attachments
Pipe Risers
MATERIALS
Carbon Steel. Also, other materials can also be provided on request.
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating
SIZES
41 X 21 mm
41 X 41 mm
Suspension Clamp
APPLICATION
Designed for suspending light pipe or conduit
CONSTRUCTION
Strap and bolt with nut – assembled
MATERIAL
Galvanized Carbon Steel
and any other materials can also be provided upon request
and any other materials can also be provided upon request
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating
Threaded Rod
MATERIALS
Mild Steel, Carbon Steel, Alloy Steel & Stainless Steel
SIZE RANGE
M6 to M64 in metric series
Default Length 200cm
Other Lengths can be manufactured as per order
Default Length 200cm
Other Lengths can be manufactured as per order
ORDERING INFORMATION
Dimensions-Size Diameter & Length
Finish-Black, Zinc Plated, Hot Dip Galvanized
Finish-Black, Zinc Plated, Hot Dip Galvanized
U Bolt With Bracket Support
APPLICATION
used to secure pipes, conduits, or cables to walls, ceilings, or structural beams
Widely used in plumbing, electrical, and HVAC systems for organizing and securing lines
Widely used in plumbing, electrical, and HVAC systems for organizing and securing lines
CONSTRUCTION
U-Bolt with Bracket Support is a combination of a U-shaped bolt and a supporting bracket
The U-bolt wraps around the pipe and is secured to the bracket, which is then mounted to the desired surface.
The U-bolt wraps around the pipe and is secured to the bracket, which is then mounted to the desired surface.
MATERIAL
Carbon Steel
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating
Washer DIN-126
SUPPLIED IN
Plain
Electro Zinc Plated
Hot Dip Galvanized
Zinc Thermal Diffused
Electro Zinc Plated
Hot Dip Galvanized
Zinc Thermal Diffused
Wedge Anchor
APPLICATIONS
Metal structures, metal profiles, brackets, foot plates, supports, cable conduits, piping, railings, wooden structures, beams.
FEATURES
Torque controlled expansion anchor with washer and hexagonal nut.
Zinc electroplated Steel (7-10 µm)
suitable for (Lift guide rails, industrial doors and gates, Storage systems)
Secure hold and easy installation
Impact protection for the thread.
Immediately load-bearing.
Zinc electroplated Steel (7-10 µm)
suitable for (Lift guide rails, industrial doors and gates, Storage systems)
Secure hold and easy installation
Impact protection for the thread.
Immediately load-bearing.
BASE MATERIAL
Non-Cracked Concrete.
Cracked concrete with multiple attachments
Cracked concrete with multiple attachments
Yoke Clamp
APPLICATION
used in conjunction with threaded components and nuts to clamp and suspend pipework. Easily height adjustable.
CONSTRUCTION
Light-medium duty clamp comes in durable hot dipped galvanised finish with hex head bolts and nuts.
MATERIAL
Galvanized Carbon Steel and any other materials can also be provided upon request
FINISH
Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating
Welded Beam Attachment 1
Application
Designed for attaching a hanger rod to the bottom of structural steel where heavy load and large hanger rod size are required. can be welded in place in either the upright or inverted position.
Construction
Made with Mild steel Strip bent in C shape having cross rod & Hanger Rod.
Material
Mild Steel
Wood support
PURPOSE
Prevents the crush of insulation of insulated pipes at the point of support have superior compression properties and excellent natural resistance to rot, decay, and termites. The main functions of a pipe support are to anchor, guide, absorb shock, and support a specified load. Pipe supports used in high or low temperature applications may contain insulation materials. The overall design configuration of a pipe support assembly is dependent on the loading and operating conditions. It’s considered the safest, most efficient and most effective way to control movement at the hanger locations in a dynamic piping system
FEATURES
Made of Fire Retardant Chemically Treated Wood
Excellent Surface Finishing
High Dimensional Accuracy
High Compressive Resistance
Light weight, Compact Size
Very High Hardness
Withstand Heavy Shocks & Impacts
Provide Thermal Insulation & Fire Retardant
Provide Vibration Absorption & System Flexibility
Moisture Resistance & Waterproof
Resistant to Oxidation & Corrosion
Doesn’t Encourage Fungi Growth
Fast & Easy Assembly & Disassembly
High Durability, Reliability & Long Life
High Quality & Low Use Cost
Slow combustibility characteristics
Protect the pipe’s Insulation at the point of support
Good Insulation material
Can be customized according to Insulation thickness
Excellent Surface Finishing
High Dimensional Accuracy
High Compressive Resistance
Light weight, Compact Size
Very High Hardness
Withstand Heavy Shocks & Impacts
Provide Thermal Insulation & Fire Retardant
Provide Vibration Absorption & System Flexibility
Moisture Resistance & Waterproof
Resistant to Oxidation & Corrosion
Doesn’t Encourage Fungi Growth
Fast & Easy Assembly & Disassembly
High Durability, Reliability & Long Life
High Quality & Low Use Cost
Slow combustibility characteristics
Protect the pipe’s Insulation at the point of support
Good Insulation material
Can be customized according to Insulation thickness
APPLICATIONS
Carry the load & allow necessary movement at each suppose point
Minimize the cost of field Installation by reducing installation time
STANDARDS COMPLIANCE
DIN 4102, UNE 23-727-90, AFNOR NF 92-501, Bs 476, part 5-8
Minimize the cost of field Installation by reducing installation time
STANDARDS COMPLIANCE
DIN 4102, UNE 23-727-90, AFNOR NF 92-501, Bs 476, part 5-8
MATERIAL
Wood
FINISH
Painted
Treated by a fire-retardant chemical coating
Treated by a fire-retardant chemical coating
FIRE PERFORMANCE
Wood is treated by a fire-retardant chemical coating; it reduces the rate in which fire spreads across the wood surface and reduces the rate of heat spread and release across the support body. It decreases the combustibility characteristics of wood leading to low rate of material combustion and burning In addition to: servicing a wide range of Use Temperature Key Features
NOTE
The dimension “I” have different values according to the insulation thickness used
Four ranges (A, B, C, D) are available, each range contain specific values for I
Range A 12.5, 20,25,30,40,50
Range B 12.5, 20,25, 30,40, 50,65, 75
Range C 12.5, 20,25, 30,40, 50,65, 75, 100
Range D 25, 30, 40, 50, 65, 75, 100
The dimensions H & L are specified according to I
Rubber support
APPLICATION
HVAC systems
Air Conditioning
Fire protection systems
Power generation
Commercial constructions
Petroleum refining
Marine and ship building
Natural gas compressor stations
CONSTRUCTION
Dimensionally accurate as each piece is molded. It has excellent resistance to distortion.
Steel reinforcement gives higher strength and load bearing capacity
PURPOSE
Is an environment Friendly Innovative product inherent from the high Pressure foamed material with special Features of high load bearing property good thermal conductivity.
Negligible water absorption. Shock and vibration proof. Nontoxic and corrosion resistance
PURPOSE
Is an environment Friendly Innovative product inherent from the high Pressure foamed material with special Features of high load bearing property good thermal conductivity.
Negligible water absorption. Shock and vibration proof. Nontoxic and corrosion resistance
FEATURES
Rubber supports are a new selection for the industry as their unique features and outstanding performance
MATERIAL
DENSITY: 1400kg/m3
ENVIRONMENT FRIENDLY
Replace wood pipe support and material can be recycling protect the environment
THERMAL CONDUCTIVITY
Conforms to national standard Gb4242-92 “gb8175-87
WATER RESISTANCE
Negligible water absorption due to closed cell structure
SHOCK & VIBRATION PROOF
Inherent high pressure foamed absorb most shock and vibration
CORROSION RESISTANCE
High pressure foamed high density resists most Chemicals acids and bases
FIRE PERFORMANCE
Tested and Conformed to British Standard BS 476-class 1 Fire Resistance
THERMAL CONDUCTIVITY
0.16W/m°C
MAXIMUM TEMPERATURE
110°C
MINIMUM TEMPERATURE
-20°C