PIPE HANGER WITH LINING is recommended for non-insulated stationary pipelines in a horizontal position. It can be used for supporting pipes along roof

PIPE clamp with lining consists of piece carbon steel shaped to wrap around the pipe, made from shaped carbon steel plate. The selection of the proper PIPE HANGER WITH EPDM LINING depends upon the temperature of the piping system and load to be carried. Permits Installation before and after pipe is in place. Reduces noise up to 18 dB

alloy steel and any other materials can also be provided upon request
APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating

TEMPERATURE
-20°C to110°C

Used for mounting of pipes to the walls (vertical/horizontal) ceilings and floors

PIPE clamp consists of piece carbon steel shaped to wrap around the pipe, made from shaped carbon steel plate

alloy steel and any other materials can also be provided upon request
APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating

Designed for high static loading requirements in plant construction. Pipe clamps manufactured according to DIN 3567

PIPE CLAMPS consist of two carbon steel flat bars bent to shape and held together by two bolts.

Carbon Steel and any other materials can also be provided upon request
APPROVALS
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating

Recommended for suspension of cold pipe lines or hot lines where no insulation is required.

PIPE CLAMPS consist of two carbon steel flat bars bent to shape and held together by two bolts.

Carbon Steel and any other materials can also be provided upon request

TEMPERATURE
110°C To-20°C

Plain,Electro-Galvanized, Hot Dip Galvanized or epoху coating

Used to secure piping to structural members. When the piping is below the structural member, the U-Bolt provides vertical support and restricts lateral movement while allowing for axial movement. When the piping system is above the structural member, the U-Bolt restricts lateral movement and upward movement while allowing axial movement of the piping

Consists of a piece of carbon steel shaped to hold the pipe down to walls or ceilings provided with four standard hex nuts and has a longer straight threaded length

Carbon Steel and any other materials can be provided upon request

APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized

MAXIMUM TEMPERATURE
20°C to 110°C

Used to secure piping to structural members. When the piping is below the structural member, the U-Bolt provides vertical support and restricts lateral movement while allowing for axial movement. When the piping system is above the structural member, the U-Bolt restricts lateral movement and upward movement while allowing axial movement of the piping

Consists of a piece of carbon steel shaped to hold the pipe down to walls or ceilings provided with four standard hex nuts and has a longer straight threaded length

Carbon Steel and any other materials can also be provided upon request

APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized

MAXIMUM TEMPERATURE
Maximum Temperature 399°C

Recommended for supporting a piping system with fittings vertically or horizontally to walls or ceilings. It can be used as a restrainer when installed on top of structural wood beams for beam, for limiting pipe movements due to thrust loads during sprinkler system start-up

Consists of a piece of carbon steel shaped to hold the pipe down to walls or ceilings – Lining reduces noise up to 18 dB

Carbon Steel and any other materials can be provided upon request

APPROVALS
Manufactured to follow specifications
ISO 45001:2018
ISO 9001:2015
ISO 14001:2015

Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating

MAXIMUM TEMPERATURE
343°C

used in conjunction with threaded components and nuts to clamp and suspend pipework. Easily height adjustable.

Light-medium duty clamp comes in durable hot dipped galvanised finish with hex head bolts and nuts.

Galvanized Carbon Steel and any other materials can also be provided upon request

Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating