Wide Application
Our Rubber Motor Mounts are mainly used for air compressors, diesel engines, gasoline engines, water pumps. Electron components, medical equipment, home appliance, mechanical equipment, office facilities, aviation, construction, automobile and may more applications
Anti-vibration & Noiseless
As a damping element for welding machines and other equipment, these boltable rubber body mounts provide excellent performance for vibration, shock and noise control, greatly helping protect the body’s normal work and get good surroundings.
Dynamic & Stable
A simple geometrical designed radiator mount bushing bolt supports dynamic performance and high stability under lateral (sideways) forces. In the radio equipment, Instruments protect machine vibration interference, having a good buffer.

CYLINDERICAL MOUNTS-MALE MALE TYPE VV SERIES
The dimension range is available in various sizes between 8-150mm, suitable for use on any application in need of vibration isolation where a Male / Male thread is required. They are available in natural rubber as standard but other compounds are available on request.
Stainless steel metal parts are also available on request for substantial volume orders.

Alternate High/Low Ribbed Construction
Easy to Cut
Pads can be cut slightly larger than the size of leg of machines using shear or knife
Easy Field Installation
Multiple layers of Ribbed Mounting Pad can be used to increase deflection
Provides the highest level of sound attenuation and vibration Isolation

Rubber

Measurements are subject to a 5% tolerance
To achieve good muffling, do not over-mount loads

Application examples include – Chillers. AHU’S pumps, centrifugal/Axial Fans, Condensing Units, Rooftop Packaged units, Reciprocating compressors, DG sets, Punch presses, Drop Hammers, Floor Pipe supports
(Normally at first few pipe supports points leading from isolated equipment

Color coded spring to facilitate identification.
Deflection up to 25mm.
Load up to 100 kgs.
7 Load Ranges

As an enclosed spring mount, It has the spring between upper and bottom housings. An anchor hole is on the bottom housing and the tap is on the top housing, which allows level control of the bolt with a level bolt and nut to be used. Plus, the spring cap with a bolt guided hole is at the top of the spring to distribute the load transferred from the level bolt and the anti-frictioner is attached between upper and bottom housings, which somewhat reduces attenuation and friction caused by left-right and top-down relative displacement when the equipment is running. There is a CR pad attached on the bottom of the bottom housing to compensate for disadvantages of the spring transferring high frequency due to a kind of surging effect.

for pumps, refrigerators, compressors and power generators
for ventilators
for air conditioning unites
for equipment with large horizontal reaction

Reciprocating Compressors
Diesel Generating Sets
Engine/Dynamometer Test Rigs
Refrigeration Plants
Pumps (Particularly Belt Driven Types)

Plain,Electro-Galvanized, Hot Dip Galvanized or epoxy coating

metal sandwich pads are constructed of steel pounded
ripped anti vibration pads
designed for very high load capacity

Rubber and steel

Axial Fans and Fan Coil Units.
Ductwork and Attenuators.
Exhaust Systems.
Acoustic Ceilings.
Any other suspended plant

Rubber & Steel

Rubber & Steel

Recommended for
machine rooms, ventilators in air conditioning rooms and ducts.
For small fans and duct in line fans.
For celling mounded FCU.

Hanger Housing which is a plate of steel with a circular cross section cut in it is upper side and rubber mount.

Carbon steel and rubber.

Hangers are used to isolate suspended sources of both noise and vibration. Suspended mechanical equipment such as air handling units, FCU’s cabinet fans, piping and ductwork in close proximity to rotating mechanical equipment are typical applications of model hangers

Spring Vibration isolation hangers are designed to provide high efficiency Isolation from structure-borne vibration and noise. Spring Hangers consist of freestanding, laterally stable steel springs in series with a moulded elastomeric element assembled into a stamped and welded hanger bracket. The hanger brackets and the springs are powder coated. Springs are colour-coded according to load ratings and are designed for 50% overload. Spring Hangers are designed to meet BS1726, class B.

Axial and Centrifugal Fans
Air Handling Units
Air Conditioning equipment
Packaged Air Conditioners
Floating Floors
Generators & Mobile Equipment
Pumps & Refrigeration Plants
Rotary and Multi Cylinder Compressors

Rubber & Steel